Doodle Labs VR-base-model Mesh Rider Radio

Overview

The VR-base-model Mesh Rider Radio is an advanced MANET data-link. The VR-freqrange bands are supported allowing it to be used VR-usage.

The VR-base-model employs Doodle Labs' patented Mesh Rider® technology with state-of-the-art RF and networking capabilities that enable communication further, faster, and more reliably than any comparable solution on the market. For example, optimized video streaming carries crystal clear 4K video while simultaneously carrying low latency command and control data.

The interoperable Mesh Rider Radio platform is available in many frequency bands between 600 MHz and 6 GHz in Nano, Mini, OEM, Embedded, Wearable and External form factors. This flexibility allows customers to use their industry specific frequency bands for deploying private wireless networks that encompass all the use cases for human and machine collaboration.

For more information, please visit: https://doodlelabs.com/smart-radio/

Frequency Bands

Band	Frequency Range
1370-MHz	1350 MHz to 1390 MHz Federal Band
2245-MHz	2200 MHz to 2290 MHz Federal Band M3
2350-MHz	2310 MHz to 2390 MHz Federal Band M4
2450-MHz	2400-MHz to 2500 MHz Federal Band M6

Key Features - Mesh Rider Radio Platform

PERFORMANCE RF

Long range (field tested >100km) and high throughput (up to 100 Mbps) Mesh Rider waveform

Interference resistant COFDM for robust link quality in difficult RF environments

Exceptional Multipath and NrLOS MIMO performance

Adaptive radio modulations from BPSK up to 64QAM, with fast per packet optimization to maximize link performance in dynamic environments

Software defined channel bandwidth for efficient re-use of spectrum

Convolutional coding, Forward Error Correction (FEC), ACK-retransmits, Maximal Ratio Combining, Spatial Multiplexing, and Space Time Block Coding for robust data transmission over noisy channel/spectrum

Single channel, Time Division Duplexing (TDD) for bi-directional traffic

Resistant to high-power jamming signals

ATPC for widely dispersed mesh network

Built-in Spectrum Scanner to help mitigate interference issues

PERFORMANCE NETWORKING

Ultra-Reliable Low Latency Channel (URLLC) for Command and Control

Optimized video streaming channel for Unicast and Multicast transport

Self-healing/self-forming multi-frequency mobile mesh for highly reliable network with redundancy

FIPS Certified AES 256- and 128-bit encryption

End-to-end IP architecture with Ad Hoc, WDS transparent bridge, Client, AP, and Internet Gateway operating modes

Embedded network management APIs

ADDITIONAL FEATURES

Very small size, weight, and power for mobile applications

Ethernet, USB, and UART interfaces to allow easy integration into different system architectures

Leverage the benefits of the most extensible OpenWrt ecosystem and install 3rd party IoT applications

Rugged, vibration resistant construction to meet MIL-specs

MIL-spec temp range (-40C to +85C)

High quality, manufactured in ISO 9001 and ISO 14001 certified facilities

COTS – Commercial off the Shelf

Extended lifespan and availability

System Integration

The Mesh Rider Radio has been designed to be plug and play. Only USB and a power supply are required for integration.

Visit Doodle Labs Technical Library for extensive design-in documents.

Technical Specifications (VR-freqrange)

Model Category	XTreme
ORDERING CODES
Radio Configuration	VR-mimo
Model #	VR-all-models
Antenna (Optional)	VR-antenna-kit
Evaluation Kit (Optional)	VR-eval-kit
Design-In Documentation	Doodle Labs Technical Library
PERFORMANCE OVERVIEW
Data Throughput at 10-meter range with Attached 3 dBi Antennas (Indicative)	VR-throughput
Over the Air Data Encryption	128-bit AES (Full throughput) 256-bit AES (12 Mbps max throughput)
FIPS Certification (Optional)	FIPS 140-3
Operating Modes	Mesh, WDS AP, WDS Client Bridged or Internet Gateway with NAT
Command & Control channel	Ultra-Reliable Low Latency Channel (URLLC). Latency 1.5-10 ms
Video Channel	Optimized video streaming with Unicast and Multicast transmission
RF SPECIFICATIONS
Protocol Compatibility	Fully compatible with Doodle Labs Mesh Rider Waveform
Frequency Range	VR-freqrange
Operating Bands (Software Selectable)	VR-operating-bands
Advanced Band Filters	Dedicated SAW filters for each band for high interference immunity
Max RF Power at SMA port (Software control) Each radio individually calibrated	VR-RF-power
Channel Sizes (Software Selectable)	VR-channel-sizes
Radio Data Rate	Auto adapting Modulation Coding Scheme (MCS0-15)
Antenna Signal Strength	-30 to -90 dBm (Recommended), Absolute Maximum= +12 dBm
Receiver LNA Gain	15 dB
RF Power Control	In 1 dBm steps, Tolerance ±1 dBm
Automatic Transmit Power Control (ATPC)	Intelligently adjusts the transmit power for very close range operation
Integrated Antenna Port Protection	Able to withstand open port, >10 KV (contact) and >15KV (open air discharge) as per IEC-61000-4-2
Wireless Error Correction	FEC, ARQ
Receive Noise Figure	+4 dB
Receive Adjacent Channel Rejection (ACRR)	34 dB @ MCS0 for 20 MHz channel (Typ)
Transmitter Adjacent Channel Leakage Ratio (ACLR)	< 28 dBr (Fc ± ChBW)
Transmitter Spurious Emission Suppression	< 40 dBc
Frequency Accuracy	±10 ppm max over life
NETWORKING SPECIFICATIONS
Mesh Router	Self-Forming/Self-Healing, Peer to Peer
Custom Software Package Manager	Image Builder, OPKG, ipk
Radio Management	Web GUI (HTTPs), SSH and JSON-RPC
Access control	Password, MAC, IP, Port filtering
Supported Protocols	IPv6, QoS, DNS, HTTPS, IP, ICMP, NTP, DHCP
Software Upgrade	Over the air software upgrade supported
HARDWARE SPECIFICATIONS
Power Input	5V ± 5%
DC Power Consumption	VR-DC-power
Dimensions	VR-dimensions
Mesh Rider Antenna Ports	VR-ant-conn
Host Interface	Ethernet (100 Base-T), 1x USB -Dev (Ethernet over USB only), 1x UART (3.3V), 1x USB-H, 3x GPIO
Temperature range (Operating)	Industrial: -40°C to +85°C * System's thermal design should ensure that the radio's case temperature is maintained within these specifications.
Temperature range (Non-Operating)	-40°C to +100°C
Ingress Protection	IP 50, Dust Protected, No Liquid protection
Relative Humidity	5% to 95% noncondensing
Shock and Vibration Resistance	Compliant to MIL-STD-810H for high shock and vibration
Reliability	Extreme Reliability, IPC Class 2 standard with Class 3 options
Integrated CPU	MIPS 24Kc, 540 MHz, 32MB Flash, 64MB DDR2 RAM
ESD Protection	IEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact Discharge and Level 4 (±15KV) for Air Discharge
MTBF	>235k hours (25 years)
Life Cycle Planning	Extended lifespan with 7 years guaranteed availability
REGULATORY INFORMATION
J/F-12 Certification	VR-jf12
FCC ID	VR-fcc
Industry Canada (IC)	VR-ic
CE	VR-ce
Regulatory Requirements	Designed and verified to meet various regulatory requirements. Formal testing and approval are required for the Integrator's antenna type. The Integrator is responsible for obtaining all regulatory approvals in target markets for the finished product.
RoHS/WEEE Compliance	Yes. 100% Recyclable/Biodegradable packaging
EXPORT INFORMATION
ECCN Code	5A992
HS Code	85256010

ADDITIONAL RF SPECIFICATIONS
MCS Rate	Modulation	Combined Output Power (dBm)	Sensitivity (dBm)	UDP Throughput (Mbps)
0	BPSK (1/2)	VR-p0	VR-s0	5.4
1	QPSK (1/2)	VR-p1	VR-s1	10.62
2	QPSK (3/4)	VR-p1	VR-s2	15.66
3	16-QAM (1/2)	VR-p1	VR-s3	20.52
4	16-QAM (3/4)	VR-p4	VR-s4	29.88
5	64-QAM (2/3)	VR-p5	VR-s5	38.88
6	64-QAM (3/4)	VR-p6	VR-s6	43.11
7	64-QAM (5/6)	VR-p7	VR-s7	47.34
8	BPSK (1/2)	VR-p0	VR-s8	10.53
9	QPSK (1/2)	VR-p1	VR-s9	20.43
10	QPSK (3/4)	VR-p1	VR-sa	29.7
11	16-QAM (1/2)	VR-p1	VR-sb	38.52
12	16-QAM (3/4)	VR-p4	VR-sc	54.72
13	64-QAM (2/3)	VR-p5	VR-sd	69.3
14	64-QAM (3/4)	VR-p6	VR-se	76.14
15	64-QAM (5/6)	VR-p7	VR-sf	82.8

Note 1: Performance based on 20-MHz bandwidth
Note 2: Sensitivity and throughput are approximately proportional to bandwidth.