Embedded/External Mesh Rider® Radio – 3625-3700 MHz (CBRS Band)
Overview
CBRS (Citizen’s Broadband Radio Service) is a very large swath of newly released license free 3.5 GHz spectrum by FCC to promote the development of new applications. The FCC calls it an “Innovation band” with the intention that it will ignite the development of new use cases, like what WiFi did over 20 years ago. Because CBRS band’s shared access is managed, it provides interference protection.
CBRS Anatomy
The figure shows the Point to Multi-Point Network architecture for the license free CBRS band. At power up, every CBSD (Citizens Broadband Radio Service Device) is required to contact the shared Spectrum Access System (SAS) over the Internet and receive operating parameters like the channel and the RF power limit. The SAS provides this authorization in accordance with other CBSDs operating in the area. The device category CBSD-A is defined for urban use cases and the high powered CBSD-B for rural-outdoor settings will be introduced in the future.
The FCC has authorized over 10 companies to operate the SAS. Doodle Labs has worked closely with Google SAS and Federated Wireless SAS to ensure the interoperability of our CBSD and pre-configure it to make this a turn-key operation. Once the CBSD receives authorization from the SAS, it can then instruct the downstream EUD (End User Device) to begin operation.
The CBRS topology is modeled after the cellular architecture. The SAS assigns non-overlapping/non-interfering channels to the adjacent cells. This greatly increases the ability to deploy large private networks without the worry of interference.
Mesh Rider® Radios for CBRS
The Mesh Rider® Radios for the 3.5 GHz CBRS band are advanced 2×2 MIMO mesh routers. The RM-3625 models are fully compliant to FCC Part 96 regulatory requirements. They provide all the building blocks to deploy license free, high performance and interference free private broadband networks. The CBRS Mesh Rider® Radios are available as CBSD/Gateway (Short Range CBSD-A and Rural CBSD-B), and EUD-A and EUD-B functions. The Gateways and EUDs are available in Embedded, External and Wearable form factors to meet application specific requirements.
Key Features - Mesh Rider® Radio Platform
PERFORMANCE RF
PERFORMANCE NETWORKING
ADDITIONAL FEATURES
System Integration
The Mesh Rider® Radio has been designed to be nearly plug and play. Only Ethernet/USB, power supply, and antenna connections are required for integration.
Visit Doodle Labs Technical Library for extensive design-in documents.
Technical Specifications (CBSD/Gateway)
| Model Category | XTreme |
|---|---|
| ORDERING CODES | |
| Radio Configuration | 2x2 MIMO |
| Model # (Embedded) | RM-3625-2J-SDB-MG (Industrial temp) RM-3625-2J-SDB-MG-C (Commercial temp) |
| Model # (External) | RM-3625-2J-SDB-EG (Industrial temp) RM-3625-2J-SDB-EG-C (Commercial temp) |
| Model options | Integrated GPS – add G suffix PoE (External only) – add O suffix |
| Evaluation Kit (Optional) | EK-3625-2J (Ethernet board for Embedded model) |
| Design-In Documentation | Doodle Labs Technical Library |
| PERFORMANCE OVERVIEW | |
| Data Throughput at 10-meter range with Attached 3 dBi Antennas (Indicative) | 35 Mbps (10 MHz Channel) |
| Over the Air Data Encryption | 128-bit AES (Full throughput) 256-bit AES (12 Mbps max throughput) |
| FIPS Certification (Optional) | FIPS 140-3 |
| Operating Modes | Gateway/AP (CBSD-A), Rural Gateway/AP (CBSD-B), Transparent Client Bridge (EUD-A), Transparent Client Bridge (EUD-B) |
| Command & Control channel | Ultra-Reliable Low Latency Channel (URLLC). Latency 1.5-10 ms |
| Video Channel | Optimized video streaming with Unicast and Multicast transmission |
| RF SPECIFICATIONS | |
| Protocol Compatibility | Fully compatible with Doodle Labs Mesh Rider Waveform |
| Frequency Range | 3550-3700 MHz (Supports GA and PAL users) |
| Advanced Band Filters | Dedicated SAW filters for high interference immunity |
| Max RF Power at SMA port (Software control) Each radio individually calibrated |
1.0W (30 dBm) @ MCS 0,8 1.0W (30 dBm) @ MCS 3,11 0.4W (26 dBm) @ MCS 5,13 250mW (2 dBm) @MCS 7,15 |
| Channel Sizes (Software Selectable) |
3, 5, 10 MHz |
| Channel Aggregation | Up to 4 channels |
| Radio Data Rate | Auto adapting Modulation Coding Scheme (MCS0-15) |
| Antenna Signal Strength | -25 to -85 dBm (Recommended), Absolute Maximum= +12 dBm |
| RF Power Control | In 1 dBm steps, Tolerance ±1 dBm |
| Automatic Transmit Power Control (ATPC) | Intelligently adjusts the transmit power for very close range operation |
| Integrated Antenna Port Protection | Able to withstand open port, >10 KV (contact) and >15KV (open air discharge) as per IEC-61000-4-2 |
| Wireless Error Correction | FEC, ARQ |
| Receive Noise Figure | +4 dB |
| Receive Adjacent Channel Rejection (ACRR) | 34 dB @ MCS0 for 20 MHz channel (Typ) |
| Transmitter Adjacent Channel Leakage Ratio (ACLR) | < 28 dBr (Fc ± ChBW) |
| Transmitter Spurious Emission Suppression | < 55 dBc |
| Frequency Accuracy | ±10 ppm max over life |
| Control for External Power Amp | DC biased signal over RF port |
| NETWORKING SPECIFICATIONS | |
| Mesh Router | Self-Forming/Self-Healing, Peer to Peer |
| Custom Software Package Manager | Image Builder, OPKG, ipk |
| Radio Management | Web GUI (HTTPs), SSH and JSON-RPC |
| Access control | Password, MAC, IP, Port filtering |
| Supported Protocols | IPv6, QoS, DNS, HTTPS, IP, ICMP, NTP, DHCP |
| Software Upgrade | Over the air software upgrade supported |
| HARDWARE SPECIFICATIONS | |
| Case Material | Aluminum (Embedded & External) |
| Power Input | 6V - 42V DC (EOL August 2022) 6V - 32V DC External supports passive POE |
| DC Power Consumption | 14W @ Max Data Throughput 5.6W in Rx mode 1.8W in Standby mode |
| Dimensions | 65 x 57 x 12 mm, 78 grams (Embedded) 148 x 137 x 58 mm, 540 grams (External) |
| Mesh Rider Antenna Ports | 2x MMCX-Female (Embedded) 2x SMA-Female (External) |
| Host Interface | 2x Ethernet (100 Base-T), 1x UART (3.3V), 2x USB 2.0 Host, 2x GPIO (Embedded) 2x Ethernet (100 Base-T), 1x UART (RS232), 2x USB 2.0 Host, 2x GPIO (External) |
| Temperature range (Operating) | Industrial: -40°C to +85°C, Commercial: -10°C to +65°C * System's thermal design should ensure that the radio's case temperature is maintained within these specifications. |
| Ingress Protection | IP 50 (Embedded), Dust Protected, No Liquids IP66 — Protected from high pressure water jets from any direction. |
| Relative Humidity | 5% to 95% noncondensing |
| Shock and Vibration Resistance | Compliant to MIL-STD-810H for high shock and vibration |
| Reliability | Extreme Reliability, IPC Class 2 standard with Class 3 options |
| Integrated GPS (optional) | Simultaneous multiple constellations (GPS/Galileo/Glonass/BeiDou/QZSS), 1.5 meter CEP position accuracy, -163 dBm tracking sensitivity |
| Integrated GPS Module with LNA | u-blox MAX-M8 series Concurrent GNSS Module (u-blox.com) |
| GPS Antenna | SMA-Female connector for external Passive antenna (External) MMCX-Female connector for external Passive antenna (Embedded) (use of Active GPS antenna is not recommended) |
| Integrated CPU | MIPS 24Kc, 540 MHz, 32MB Flash, 64MB DDR2 RAM |
| ESD Protection | IEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact Discharge and Level 4 (±15KV) for Air Discharge |
| MTBF | >235k hours (25 years) |
| Life Cycle Planning | Extended lifespan with 7 years guaranteed availability |
| REGULATORY INFORMATION | |
| FCC ID | 2AG87RM-3625 |
| Flammability Rating | UL94 V-0 compliant |
| Regulatory Requirements | Designed and verified to meet various regulatory requirements. Formal testing and approval are required for the Integrator's antenna type. The Integrator is responsible for obtaining all regulatory approvals in target markets for the finished product. | RoHS/WEEE Compliance | Yes. 100% Recyclable/Biodegradable packaging |
Technical Specifications (End User Device, EUD)
The Mesh Rider® Radios are available as lower cost End User Devices (EUD) to work with the CBSD/Gateway devices. The EUDs can interoperate with all CBSD options available. The table below shows only the specifications that are different than the CBSD specifications. This module can only operate in a host device acting as an end user device.
| Model Category | XTreme |
|---|---|
| ORDERING CODES | |
| Radio Configuration | 2x2 MIMO |
| Model # (Embedded) | RM-3625-2J-UDB-MG (Industrial temp) RM-3625-2J-UDB-MG-C (Commercial temp) |
| Model # (External) | RM-3625-2J-UDB-EG (Industrial temp)) RM-3625-2J-UDB-EG-C (Commercial temp) |
| Evaluation Kit (Optional) | EK-3625-2J (Ethernet board for Embedded model) |
| Design-In Documentation | Doodle Labs Technical Library |
| EUD SPECIFICATIONS | |
| Operating Modes | Transparent Client Bridge |
| RF Power Output (Typ) | 23 dBm |
| DC Power Consumption | 8.2 W @ 23 dBm 5.6 W @ RX 1.8 W @ standby |
| REGULATORY INFORMATION | |
| FCC ID | 2AG87RM-3625 2AG87-RM3625 |
| EXPORT INFORMATION | |
| ECCN Code | 5A992 |
| HS Code | 85256010 |
Additional RF Specifications (Applies to all CBSD and EUD models)
| Additional RF Specifications | ||||
|---|---|---|---|---|
| MCS Rate | Modulation | Combined Output Power (dBm) | Sensitivity (dBm) | UDP Throughput (Mbps) |
| 0 | BPSK (1/2) | 30 | -96 | 2.7 |
| 1 | QPSK (1/2) | 30 | -93 | 5.3 |
| 2 | QPSK (3/4) | 30 | -91 | 7.9 |
| 3 | 16-QAM (1/2) | 30 | -88 | 10.4 |
| 4 | 16-QAM (3/4) | 27 | -83 | 15.3 |
| 5 | 64-QAM (2/3) | 26 | -81 | 20.0 |
| 6 | 64-QAM (3/4) | 25 | -78 | 22.3 |
| 7 | 64-QAM (5/6) | 24 | -75 | 24.6 |
| 8 | BPSK (1/2) | 30 | -93 | 5.3 |
| 9 | QPSK (1/2) | 30 | -89 | 10.4 |
| 10 | QPSK (3/4) | 30 | -87 | 15.2 |
| 11 | 16-QAM (1/2) | 30 | -84 | 19.9 |
| 12 | 16-QAM (3/4) | 27 | -80 | 28.6 |
| 13 | 64-QAM (2/3) | 26 | -76 | 36.7 |
| 14 | 64-QAM (3/4) | 25 | -75 | 40.5 |
| 15 | 64-QAM (5/6) | 24 | -74 | 44.2 |
Note 1: Performance based on 10-MHz bandwidth
Note 2: Sensitivity and throughput are approximately proportional to bandwidth.
FCC Statement
FCC Standards: FCC CFR Title 47 Part 96
External Antenna ：
| Antenna | Gain (dBi) | Cable Loss (dB) | True Gain (dBi) | Remark |
|---|---|---|---|---|
| 1 | 9.5 | 2.71 | 6.79 | Category A Device |
| 2 | 18 | 2,71 | 15.29 | Category B Device |
| 3 | 3 | 0.63 | 2.37 | End User Device |
FCC Regulatory Compliance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.
Labeling and Notice to OEM Integrator If the FCC ID is not visible when the module is installed inside another device, then the outside of the finished product into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording as follows:
For the RM-3625: Category A and Category B devices
Contains Transmitter Module FCC ID: 2AG87RM-3625 or
Contains FCC ID: 2AG87RM-3625
This transmitter operates as Category A and Category B CBSD. Category B CBSD is limited to professional installation and outdoor operations.