Skip to content

Doodle Labs Helix Mesh Rider Radio

Overview

The Helix Mesh Rider Radio is an advanced MANET data-link. Six frequency bands (M1-M6) in the 1625 to 2500 MHz range allows it to be used globally.

Helix employs Doodle Labs' patented Mesh Rider® technology with state-of-the-art RF and networking capabilities that enable communication further, faster, and more reliably than any comparable solution on the market. For example, optimized video streaming carries crystal clear 4K video while simultaneously carrying low latency command and control data.

The interoperable Mesh Rider Radio platform is available in many frequency bands between 600 MHz and 6 GHz in Nano, Mini, OEM, Embedded, Wearable and External form factors. This flexibility allows customers to use their industry specific frequency bands for deploying private wireless networks that encompass all the use cases for human and machine collaboration.

For more information, please visit: https://doodlelabs.com/smart-radio/


Frequency Bands

Alt

Key Features - Mesh Rider Radio Platform

PERFORMANCE RF

  • Long range (field tested >100km) and high throughput (up to 100 Mbps) Mesh Rider waveform
  • Interference resistant COFDM for robust link quality in difficult RF environments
  • Exceptional Multipath and NrLOS MIMO performance
  • Adaptive radio modulations from BPSK up to 64QAM, with fast per packet optimization to maximize link performance in dynamic environments
  • Software defined channel bandwidth for efficient re-use of spectrum
  • Convolutional coding, Forward Error Correction (FEC), ACK-retransmits, Maximal Ratio Combining, Spatial Multiplexing, and Space Time Block Coding for robust data transmission over noisy channel/spectrum
  • Single channel, Time Division Duplexing (TDD) for bi-directional traffic
  • Resistant to high-power jamming signals
  • ATPC for widely dispersed mesh network
  • Built-in Spectrum Scanner to help mitigate interference issues

    • PERFORMANCE NETWORKING

  • Ultra-Reliable Low Latency Channel (URLLC) for Command and Control
  • Optimized video streaming channel for Unicast and Multicast transport
  • Self-healing/self-forming multi-frequency mobile mesh for highly reliable network with redundancy
  • FIPS Certified AES 256- and 128-bit encryption
  • End-to-end IP architecture with Ad Hoc, WDS transparent bridge, Client, AP, and Internet Gateway operating modes
  • Embedded network management APIs

    • ADDITIONAL FEATURES

  • Very small size, weight, and power for mobile applications
  • Ethernet, USB, and UART interfaces to allow easy integration into different system architectures
  • Leverage the benefits of the most extensible OpenWrt ecosystem and install 3rd party IoT applications
  • Rugged, vibration resistant construction to meet MIL-specs
  • MIL-spec temp range (-40C to +85C)
  • High quality, manufactured in ISO 9001 and ISO 14001 certified facilities
  • COTS – Commercial off the Shelf
  • Extended lifespan and availability

    • System Integration

    The Mesh Rider Radio has been designed to be plug and play. Only USB and a power supply are required for integration.

    Visit Doodle Labs Technical Library for extensive design-in documents.


    Technical Specifications (1625~2500 MHz, Hex band)

    Model Category XTreme
    ORDERING CODES
    Radio Configuration 2x2 MIMO
    Model # RM-2025-62M3

    (legacy) RM-2025-2LMX-SA-ST
    (legacy) RM-2025-2LMX-SA-ST-C
    Antenna (Optional) ANT-2025-3-O
    Evaluation Kit (Optional) EK-2025-2L: 2x Multi-band Antenna, Breakout board, Cables
    Design-In Documentation Doodle Labs Technical Library
    PERFORMANCE OVERVIEW
    Unobstructed Operating Range with 3 dBi Antennas on both ends (Indicative) >8 Km (>5 Miles)
    Data Throughput at 10-meter range with Attached 3 dBi Antennas (Indicative) 80 Mbps (20 MHz Channel)
    40 Mbps (10 MHz Channel)
    20 Mbps (5 MHz Channel)
    12 Mbps (3 MHz Channel)
    Over the Air Data Encryption 128-bit AES (Full throughput)
    256-bit AES (12 Mbps max throughput)
    FIPS Certification (Optional) FIPS 140-3
    Operating Modes Mesh, WDS AP, WDS Client
    Bridged or Internet Gateway with NAT
    Command & Control channel Ultra-Reliable Low Latency Channel (URLLC). Latency 1.5-10 ms
    Video Channel Optimized video streaming with Unicast and Multicast transmission
    RF SPECIFICATIONS
    Protocol Compatibility Fully compatible with Doodle Labs Mesh Rider Waveform
    Frequency Range 1625-2500 MHz
    Operating Bands (Software Selectable) M1 = 1625-1725 MHz
    M2 = 1780-1850 MHz
    M3 = 2025-2110 MHz
    M4 = 2200-2290 MHz
    M5 = 2310-2390 MHz
    M6 = 2400-2510 MHz
    Advanced Band Filters Dedicated SAW filters for each band for high interference immunity
    Max RF Power at SMA port (Software control)
    Each radio individually calibrated    		 1.3W (31 dBm) @ MCS 0,8
    1.0W (30 dBm) @ MCS 3,11
    0.8W (28 dBm) @ MCS 5,13
    250mW (24 dBm) @MCS 7,15
    Channel Sizes
    (Software Selectable)    		 3, 5, 10, 20 MHz
    Radio Data Rate Auto adapting Modulation Coding Scheme (MCS0-15)
    Antenna Signal Strength -30 to -90 dBm (Recommended), Absolute Maximum= +12 dBm
    Receiver LNA Gain 15 dB
    RF Power Control In 1 dBm steps, Tolerance ±1 dBm
    Automatic Transmit Power Control (ATPC) Intelligently adjusts the transmit power for very close range operation
    Integrated Antenna Port Protection Able to withstand open port, >10 KV (contact) and >15KV (open air discharge) as per IEC-61000-4-2
    Wireless Error Correction FEC, ARQ
    Receive Noise Figure +4 dB
    Receive Adjacent Channel Rejection (ACRR) 34 dB @ MCS0 for 20 MHz channel (Typ)
    Transmitter Adjacent Channel Leakage Ratio (ACLR) < 28 dBr (Fc ± ChBW)
    Transmitter Spurious Emission Suppression < 40 dBc
    Frequency Accuracy ±10 ppm max over life
    NETWORKING SPECIFICATIONS
    Mesh Router Self-Forming/Self-Healing, Peer to Peer
    Custom Software Package Manager Image Builder, OPKG, ipk
    Radio Management Web GUI (HTTPs), SSH and JSON-RPC
    Access control Password, MAC, IP, Port filtering
    Supported Protocols IPv6, QoS, DNS, HTTPS, IP, ICMP, NTP, DHCP
    Software Upgrade Over the air software upgrade supported
    HARDWARE SPECIFICATIONS
    Power Input 5V ± 5%
    DC Power Consumption Bands M1-M3:
    Average 7W (50% Tx/Rx duty cycle), 10W Peak Tx power @ max range, 4.5W Rx mode

    Bands M4-M6:
    Average 5W (50% Tx/Rx duty cycle), 8W Peak Tx power @ max range, 2W Rx mode
    Dimensions Baseband: 47 x 28 x 5 mm
    RF Board: 46 x 51 x 6.5 mm
    36.5 grams
    Mesh Rider Antenna Ports 2x MMCX-Female connector
    Host Interface Ethernet (100 Base-T), USB -Dev, 1x UART (3.3V)
    Temperature range (Operating) Industrial: -40°C to +85°C
    * System's thermal design should ensure that the radio's case temperature is maintained within these specifications.
    Temperature range (Non-Operating) -40°C to +100°C
    Ingress Protection IP 50, Dust Protected, No Liquid protection
    Relative Humidity 5% to 95% noncondensing
    Shock and Vibration Resistance Compliant to MIL-STD-810H for high shock and vibration
    Reliability Extreme Reliability, IPC Class 2 standard with Class 3 options
    Integrated CPU MIPS 24Kc, 540 MHz, 32MB Flash, 64MB DDR2 RAM
    ESD Protection IEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact Discharge and Level 4 (±15KV) for Air Discharge
    MTBF >235k hours (25 years)
    Life Cycle Planning Extended lifespan with 7 years guaranteed availability
    REGULATORY INFORMATION
    J/F-12 Certification J/F # 11929 (NTIA DD1494 available upon request)
    FCC ID 2AG87RM2450-2L
    Industry Canada (IC) 21411-RM24502L
    CE Fully Certified (2.4-GHz)
    Regulatory Requirements Designed and verified to meet various regulatory requirements. Formal testing and approval are required for the Integrator's antenna type. The Integrator is responsible for obtaining all regulatory approvals in target markets for the finished product.
    RoHS/WEEE Compliance Yes. 100% Recyclable/Biodegradable packaging
    EXPORT INFORMATION
    ECCN Code 5A992
    HS Code 85256010
    ADDITIONAL RF SPECIFICATIONS
    MCS RateModulationCombined Output Power (dBm)Sensitivity (dBm)UDP Throughput (Mbps)
    0BPSK (1/2)32-935.4
    1QPSK (1/2)29-9110.62
    2QPSK (3/4)29-8915.66
    316-QAM (1/2)29-8720.52
    416-QAM (3/4)28-8329.88
    564-QAM (2/3)27-7938.88
    664-QAM (3/4)26-7743.11
    764-QAM (5/6)24-7547.34
    8BPSK (1/2)30-9010.53
    9QPSK (1/2)29-8820.43
    10QPSK (3/4)29-8629.7
    1116-QAM (1/2)29-8438.52
    1216-QAM (3/4)28-8054.72
    1364-QAM (2/3)27-7669.3
    1464-QAM (3/4)26-7476.14
    1564-QAM (5/6)24-7282.8

    Note 1: Performance based on 20-MHz bandwidth
    Note 2: Sensitivity and throughput are approximately proportional to bandwidth.