Skip to content

Multiband Wearable Mesh Rider Radio – 1625~2500 MHz, Hex band



The Multiband Wearable VR-base-model Mesh Rider Radio operates in the VR-freqrange frequency range allowing it to be used VR-usage. Each device is a node on a long-range Mesh Rider network and uses Wi-Fi to bridge Tablets and Smartphones onto the network. The Multiband Wearable Mesh Rider Radio is used by tactical teams to collaborate by streaming voice, video, and data on a fast, low latency, and encrypted network.

The Multiband Wearable VR-base-model Mesh Rider Radio was designed to be conveniently carried and is capable of streaming HD video to a teammate up to 1 km away. External antenna ports are included to integrate with high-gain antennas for longer distances. The radio is available with or without a battery pack, or with additional interfaces for fixed installations.

As with all Mesh Rider Radio form factors, the Multiband Wearable Mesh Rider Radio is available in many frequency bands between 900 MHz and 6 GHz freq range. This flexibility allows customers to use their industry specific frequency bands for deploying private wireless networks.

The Mesh Rider Radio employs Doodle Labs' patented Mesh Rider® technology with state-of-the-art RF and networking capabilities that enable communication further, faster, and more reliably than any comparable solution on the market. For example, optimized video streaming carries crystal clear 4K video while simultaneously carrying Ultra Reliable Low Latency (URLLC) command and control (C&C) data for machines.

For more information, please visit:

Frequency Bands

Band Frequency Range
1675-MHz 1625 MHz to 1725 MHz
Federal Band M1
1815-MHz 1780 MHz to 1850 MHz
Federal Band M2
2065-MHz 2025 MHz to 2110 MHz
Federal Band M5
2245-MHz 2200 MHz to 2290 MHz
Federal Band M3
2350-MHz 2310 MHz to 2390 MHz
Federal Band M4
2450-MHz 2400-MHz to 2500 MHz
Federal Band M6
2450-MHz 2400-MHz to 2482 MHz
Global ISM Band

Key Features - Mesh Rider Radio Platform


  • Long range (field tested >100km) and high throughput (up to 100 Mbps) Mesh Rider waveform
  • Interference resistant COFDM for robust link quality in difficult RF environments
  • Exceptional Multipath and NrLOS MIMO performance
  • Adaptive radio modulations from BPSK up to 64QAM, with fast per packet optimization to maximize link performance in dynamic environments
  • Software defined channel bandwidth for efficient re-use of spectrum
  • Convolutional coding, Forward Error Correction (FEC), ACK-retransmits, Maximal Ratio Combining, Spatial Multiplexing, and Space Time Block Coding for robust data transmission over noisy channel/spectrum
  • Single channel, Time Division Duplexing (TDD) for bi-directional traffic
  • Resistant to high-power jamming signals
  • ATPC for widely dispersed mesh network
  • Built-in Spectrum Scanner to help mitigate interference issues

  • Ultra-Reliable Low Latency Channel (URLLC) for Command and Control
  • Optimized video streaming channel for Unicast and Multicast transport
  • Self-healing/self-forming multi-frequency mobile mesh for highly reliable network with redundancy
  • FIPS Certified AES 256- and 128-bit encryption
  • End-to-end IP architecture with Ad Hoc, WDS transparent bridge, Client, AP, and Internet Gateway operating modes
  • Embedded network management APIs

  • Very small size, weight, and power for mobile applications
  • Ethernet, USB, and UART interfaces to allow easy integration into different system architectures
  • Leverage the benefits of the most extensible OpenWrt ecosystem and install 3rd party IoT applications
  • Rugged, vibration resistant construction to meet MIL-specs
  • MIL-spec temp range (-40C to +85C)
  • High quality, manufactured in ISO 9001 and ISO 14001 certified facilities
  • COTS – Commercial off the Shelf
  • Extended lifespan and availability
  • System Integration

    The Mesh Rider Radio has been designed to be plug and play. Only USB and a power supply are required for integration.

    Visit Doodle Labs Technical Library for extensive design-in documents.

    Technical Specifications (VR-freqrange)

    Model Category XTreme
    Radio Configuration VR-mimo
    Model # VR-all-models
    Antenna (Optional) VR-antenna-kit
    Evaluation Kit (Optional) VR-eval-kit
    Design-In Documentation Doodle Labs Technical Library
    Data Throughput at 10-meter range with Attached 3 dBi Antennas (Indicative) VR-throughput
    Over the Air Data Encryption 128-bit AES (Full throughput)
    256-bit AES (12 Mbps max throughput)
    FIPS Certification (Optional) FIPS 140-3
    Operating Modes WiFi Radio: AP, Client
    Mesh, WDS AP, WDS Client
    Bridged or Internet Gateway with NAT
    Command & Control channel Ultra-Reliable Low Latency Channel (URLLC). Latency 1.5-10 ms
    Video Channel Optimized video streaming with Unicast and Multicast transmission
    Protocol Compatibility Fully compatible with Doodle Labs Mesh Rider Waveform
    Operating Bands (Software Selectable) VR-operating-bands
    Advanced Band Filters Dedicated filters for high interference immunity
    Max RF Power at SMA port (Software control)
    Each radio individually calibrated
    Channel Sizes
    (Software Selectable)
    Radio Data Rate Auto adapting Modulation Coding Scheme (MCS0-15)
    Antenna Signal Strength -30 to -90 dBm (Recommended), Absolute Maximum= +12 dBm
    RF Power Control In 1 dBm steps, Tolerance ±1 dBm
    Automatic Transmit Power Control (ATPC) Intelligently adjusts the transmit power for very close range operation
    Integrated Antenna Port Protection Able to withstand open port, >10 KV (contact) and >15KV (open air discharge) as per IEC-61000-4-2
    Wireless Error Correction FEC, ARQ
    Receive Noise Figure +4 dB
    Receive Adjacent Channel Rejection (ACRR) 34 dB @ MCS0 for 20 MHz channel (Typ)
    Transmitter Adjacent Channel Leakage Ratio (ACLR) < 28 dBr (Fc ± ChBW)
    Transmitter Spurious Emission Suppression < 40 dBc
    Frequency Accuracy ±10 ppm max over life
    WiFi Standard IEEE 802.11n, 1x1 SISO
    Frequency Range VR-wifi-freqrange
    RF Power Output (Typ) 50 mW (17 dBm) EIRP
    Channel Size 20 MHz
    Radio Data Rate Auto adapting Modulation Coding Scheme (MCS 0-7)
    Antenna Signal Strength -25 to -85 dBm (Recommended), Absolute Maximum= +12 dBm
    RF Power Control In 1 dBm steps, Tolerance ±1 dBm
    Wireless Error Correction FEC, ARQ
    Mesh Router Self-Forming/Self-Healing, Peer to Peer
    Custom Software Package Manager Image Builder, OPKG, ipk
    Radio Management Web GUI (HTTPs), SSH and JSON-RPC
    Access control Password, MAC, IP, Port filtering
    Supported Protocols IPv6, QoS, DNS, HTTPS, IP, ICMP, NTP, DHCP
    Software Upgrade Over the air software upgrade supported
    Power Input 6V - 24V, USB-PD Compliant
    DC Power Consumption VR-DC-power
    Dimensions VR-dimensions
    Mesh Rider Antenna Ports VR-ant-conn
    Host Interface VR-interfaces
    Temperature range (Operating) Industrial: -30°C to +70°C
    * System's thermal design should ensure that the radio's case temperature is maintained within these specifications.
    Temperature range (Non-Operating) -40°C to +100°C
    Ingress Protection VR-ip-rating
    Relative Humidity 5% to 95% noncondensing
    Shock and Vibration Resistance Compliant to MIL-STD-810H for high shock and vibration
    Reliability Extreme Reliability, IPC Class 2 standard with Class 3 options
    WiFi Hotspot Antennas VR-wifi-ant-conn
    GPS Features Simultaneous multiple constellations (GPS/SBAS/Galileo/Glonass/BeiDou/QZSS)

    Receive Sensitivity -167 dBm, Max. Velocity 500m/sec ± 0.05m/S, Heading ± 0.3 degrees, Position Accuracy 2m
    Integrated GPS Module with LNA u-blox MAX-M8 series Concurrent GNSS Module (
    GPS Antenna VR-gps-ant-conn
    Integrated CPU MIPS 24Kc, 540 MHz, 32MB Flash, 64MB DDR2 RAM
    ESD Protection IEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact Discharge and Level 4 (±15KV) for Air Discharge
    MTBF >235k hours (25 years)
    Life Cycle Planning Extended lifespan with 7 years guaranteed availability
    J/F-12 Certification VR-jf12
    FCC ID VR-fcc
    Industry Canada (IC) VR-ic
    CE VR-ce
    Japan (MIC) VR-jp
    Regulatory Requirements Designed and verified to meet various regulatory requirements. Formal testing and approval are required for the Integrator's antenna type. The Integrator is responsible for obtaining all regulatory approvals in target markets for the finished product.
    RoHS/WEEE Compliance Yes. 100% Recyclable/Biodegradable packaging
    ECCN Code 5A992
    HS Code 85256010
    MCS RateModulationCombined Output Power (dBm)Sensitivity (dBm)UDP Throughput (Mbps)
    0BPSK (1/2)VR-p0VR-s05.4
    1QPSK (1/2)VR-p1VR-s110.62
    2QPSK (3/4)VR-p1VR-s215.66
    316-QAM (1/2)VR-p1VR-s320.52
    416-QAM (3/4)VR-p4VR-s429.88
    564-QAM (2/3)VR-p5VR-s538.88
    664-QAM (3/4)VR-p6VR-s643.11
    764-QAM (5/6)VR-p7VR-s747.34
    8BPSK (1/2)VR-p0VR-s810.53
    9QPSK (1/2)VR-p1VR-s920.43
    10QPSK (3/4)VR-p1VR-sa29.7
    1116-QAM (1/2)VR-p1VR-sb38.52
    1216-QAM (3/4)VR-p4VR-sc54.72
    1364-QAM (2/3)VR-p5VR-sd69.3
    1464-QAM (3/4)VR-p6VR-se76.14
    1564-QAM (5/6)VR-p7VR-sf82.8

    Note 1: Performance based on 20-MHz bandwidth
    Note 2: Sensitivity and throughput are approximately proportional to bandwidth.

    FCC Statement

    Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help

    This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

    IC Statement

    This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

    1. This device may not cause interference; and
    2. This device must accept any interference, including interference that may cause undesired operation of the device.

    The term "IC: " before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

    Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement

    CE Statement

    This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

    CAUTION: To comply with the Europe CE requirement, this device must be installed with CE certified computer equipment which meet with Class A limits. Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel.

    All cables used to connect this device must be shielded and grounded. Operation with non-certified computers or incorrect cables may result in interference to other devices or undesired effects to the product. Particular attention has to be given allowed operational frequencies.